Making RC Boat for 3D Printed Outboard Motor. DIY RC 3D Printed BOAT

How to make 3D printed boat and outboard motor.

Necessary materials:
Brushed Water-Cooled ESC : https://s.click.aliexpress.com/e/_De5aveT
7.4V 2S 3300mah LiPo : https://s.click.aliexpress.com/e/_DkdSG6F OR  8000mah: https://s.click.aliexpress.com/e/_DBAcgT9
MG996R Servo: https://s.click.aliexpress.com/e/_DkVqQ43
Radio Control: https://s.click.aliexpress.com/e/_DCPHEVN or https://tr.banggood.com/custlink/vvGEUUB1Tq
Lipo Battery Charger: https://s.click.aliexpress.com/e/_DF5pqlz OR
Silicone cable (14AWG): https://s.click.aliexpress.com/e/_DE2EapN

SEQURE SQ-ES126 Mini Electric Screwdriver : https://www.banggood.com/custlink/DDmCEaJ5Pz
Super CA Glue with Spray Adhesive Activator (like this): shorturl.at/cLZ27

3D Printer STL Files For Boat: https://www.printables.com/model/720408-rc-boat-with-outboard-motor


– If the nose is down, increase the motor angle to correct it.
– If the nose is too high, reduce the motor angle to the negative to correct it.

Making 3D Printed Outboard Motor …

Diy water-cooled outboard motor for Remote Control Boat…

Necessary materials:
540 Size 27T brushed motor : https://s.click.aliexpress.com/e/_DkGwNGX OR more speed 23T motor: https://s.click.aliexpress.com/e/_DeIcxPH
55 or 57mm 3 Blade Propeller. ( inner diameter 4.8mm or 5mm): https://s.click.aliexpress.com/e/_DBzrS6J
10x15x4 ball bearing (4 qty): https://s.click.aliexpress.com/e/_DmmtJGr

Gear ratio: 2:1

3D Printer STL Files For Outboard Motor: https://www.printables.com/model/720345-powerful-outboard-motor-for-rc-boat

Note: I chose the white filament for both the motor and the body as it is more resistant to sunlight. Black parts should be printed with ASA or ABS. If PLA is to be used, I recommend printing them in white.