How To Make Delta / V-Tail Mix Arduino Receiver For Delta Wing RC Airplane
Some model airplanes have delta wings. Some have V-tails. In delta wing models, two channels must work together as both aileron and elevator. In V-Tail …
Category: Main
DIY RC Airplane Powered by Hard Drive HDD Motor
I had previously disassembled and tested a hard drive motor. The test video is below. So can an RC plane fly with a HDD motor? …
3D Print Scroll Saw
How to make a scroll saw that provides good performance for hobby use? These types of saw machines can create a lot of vibration when …
Reverse Polarity Protection Circuits
Series Diode Connection for Reverse Polarity Protection: The series diode is the cheapest and simplest protection method. It is very easy to implement and can …
Drone Making with Handmade Arduino Remote Control. DIY FPV Drone.
Making a 3D printed drone with Arduino remote control, which I shared the video of before. An FPV system can be added optionally. I made …
Fully 3D Printing RC Car Making (Low cost)
Fully 3D printed remote control model car, including gearbox, tires and rims. Controlled by handmade RC. It can also be used with different RCs if …
RC Servo Signal Reverse Circuit
If your remote control receiver does not have enough channels, this is a circuit you can use to change the signal direction of the servo. …
How to Make Super Simple RC Airplane With Handmade RC
I used 3 servos for this model. The model can take off and land from short distances. That’s why the nose wheel is fixed. A …
How To Make 6-Channel (Optional 8 Channel) Radio Control. Range 2000m+
Making a 6-channel, long-range remote control with Arduino and 2.4Ghz NRF24L01 Modules. With this 6-Channel remote control circuit, you can control model vehicles such as …
Making a Scale with Load Cell and Arduino
How to make a precision scales with Arduino and HX711 module? DIY SCALES. In this project, I used a load cell with 5kg support. …